Typical Use Physical Properties Contact Us
Product Description
Primarily intended for use as a molding, encapsulating, and potting compound for harness breakouts, watertight electrical connectors, cables, cable end seals, printed circuitry, and other electrical components. The system also has use in the casting or molding of mechanical parts and as a lining material for pumps, chutes, and conveyors where outstanding abrasion resistance is a necessity.
Additional Information
| Colour | Black |
|---|---|
| Components | 2 |
| Elongation | 400.00% |
| Mix Ratio | 3:1 by volume |
| Specific Gravity | Part A: 1.05 Part B: 1.03 |
| Tensile Strength | 5,000 psi |
| Viscosity Cp | Part A: 18,000 Part B: 3,000 |
| Volume Resistivity | 2.4 x 10(12) ohm-cm @ 77°F 9.6 x 10(10) ohm-cm @ 250ºF |
Related Products
Check items to add to the cart or select all
My Cart
You have no items in your shopping cart.
Compare Products
You have no items to compare.