Robnor ResinLab

 

   robnor logo  
     
     
 

Robnor ResinLab is a formulator of polyurethane and epoxy resin systems which are used across a broad spectrum of industries including transportation, electronics and LED lighting.

 

Ellsworth Adhesives Europe is an official distributor of all Robnor ResinLab products. Formerly branded as Robnor Resins, the company became Robnor ResinLab in December 2016 after forming a strategic partnership with US resin manufacturer and fellow Ellsworth company, ResinLab.

 

The core Robnor ResinLab range consists of epoxy and polyurethane adhesives, encapsulants, potting compounds, coatings and pastes.
 
     
 
  Robnor Selector Guide  
 

 

Robnor ResinLab Selector Guide - (PDF)

 
 
     
     

Items 1 to 10 of 21 total

per page
Page:
  1. 1
  2. 2
  3. 3

Grid  List 

Set Descending Direction
  1. Robnor Resinlab PX439F

    PX439F by Robnor Resinlab, is a semi flexible thermally conductive flame retardant potting and encapsulating compound commonly used for transformers, capacitators, PCB’s and Power Supplies. Key properties include: non-toxic, low shrinkage, high adhesion, High electrical insulating characteristics, Good chemical and water resistance, Meets requirements of UL94&V0 Learn More
    £0.00

  2. Robnor Resinlab EL199HP

    EL199HP is a flame retardant, high performance, low viscosity, polyurethane resin system commonly used for ferrite cores, inductance coils, glass reeds and load cells. Learn More
    £0.00

  3. Robnor Resinlab EL227CL

    Robnor Resinlab's EL227CL is a flexible, two-part polyurethane resin that has a low viscosity and low embedment stress suitable for the encapsulation of delicate components. EL227CL offers excellent electrical insulation and low water absorption. Learn More
    £0.00

  4. Robnor Resinlab EL297C

    EL297 is a high performance, flame retardant polyurethane encapsulating resin system based on a hydrophobic polyol. This basic two-component polyurethane system is widely used for the encapsulation of electronic components, transformers and inductance coils thanks to its low dielectric loss and high dielectric strength. EL297C offers excellent water and humidity resistance, lower embedment stress and high thermal conductivity. Learn More
    £0.00

  5. Robnor Resinlab EL600F

    EL600F by Robnor Resinlab is a low viscosity, fast curing polyurethane resin system used for encapsulating, potting, moulding and casting. Learn More
    £0.00

  6. Robnor Resinlab TCP091

    Key properties: • Good thermal conductivity • Better shelf life • Excellent flow - thixotropic (Non Slumping) yet still has flow through a small nozzle with minimum effort. • Excellent resistance to mould growth. • Excellent dielectric properties at all frequencies • Non-corrosive to Cadmium and Zinc plate • Operating temperature range -50 to +130°C Learn More
    £0.00

  7. Robnor Resinlab PX628FF

    Dissimilar materials can often be tricky to bond, but our product of the month from Robnor Resinlab, PX628FF can effectively tackle the job. Robnor PX628FF is a two part, room temperature curing epoxy adhesive with flexible properties. As a thixotropic material it becomes less viscous upon shaking or stirring, before returning to a semi solid state when settled. PX628FF also offers high impact resistance and benefits from being non-toxic. Learn More
    £0.00

  8. Robnor ResinLab PX901C

    Robnor ResinLab PX901C is an Epoxy Resin with excellent heat resistance and dimensional stability. This rigid, two-component thermally conductive epoxy resin offers end users high electrical insulation, low shrinkage and excellent chemical resistance. With a Viscosity of 3400 – 8000 (when mixed) and exceptionally good operating temperature of up to 220°C, this material is very easy to work with. Available in beige or black, PX901C can be purchased in bulk, as a twin pack or as a kit. Key Properties - High Thermal Conductivity - High Electrical Insulating Characteristics - High Dimensional Stability - Low Shrinkage - Excellent Chemical and Heat Resistance - Does not contain halogens or heavy metals - WEEE / RoHS / REACH Compliant Learn More
    £0.00

  9. Robnor ResinLab GR100

    Robnor ResinLab GR100 is a non-hazardous and hazard labelling free resin. GR100 is free from Isocynate or plasticiser and has been designed as an alternative option to polyurethanes, for applications such as potting, encapsulation and cable jointing. Features: Cures at 0 degrees Limited Exotherm Easy to mix and process Dig-outable Good tack and adhesion to plastics Non hazardous Convenient mix ratio Learn More
    £0.00

  10. Robnor Resinlab EL171LF

    Robnor Resinlab EL171LF is a low viscosity, semi-rigid version of EL171H, suitable for the potting and encapsulation of a wide variety of electrical and electronic devices. This basic two-component polyurethane system is non toxic and cures at room temperature. Learn More
    £0.00

Items 1 to 10 of 21 total

per page
Page:
  1. 1
  2. 2
  3. 3

Grid  List 

Set Descending Direction